First is important to have all the materials ready

Then you will start to cut the chain. The first pieces is the necklace part this will be with the chain CH104GM, cut the chain to measure 18 inches. Then with the flat nose pliers you are going to attach the jumpring GMF102, and then on the other side you will attach the lobster clasp GMF101 to the same jumpring you used before (GMF102) and then to the chain.

Now you are going to start with the front body part this will measure 9 inches and you will use the crystal chain CH105GM then using the jumpring GMF102 you will attach it to the necklace.

For the waist part we will use four pieces of chain to being CH104GM ( the plain chain) and the other two will be CH105GM (the crystal chain). Make sure that the crystal chain is at the top. For CH105GM you will need two pieces of 19 inches each, and for the CH104GM Chain you will need two pieces of 20 inches each.

Now you will take on pieces of the crystal chain and one piece of the plain chain and attach both to a jumpring and attach that jumpring to the bottom side of the front chain. Then take another jumpring and do the same with the other two chains also attaching it to the front chain.

The last step is to repeat the process from necklace part. Attaching one lobster clasp on one side of each waist chain and one jumpring on the opposite side.

Now you have a beautiful accessory for the summer!